1. We are upgrading to a 2.0 version of our forum as this 1.5 version is no longer supported. Please look at your bookmarks if you have them and note them in a text document as the import process for bookmarks may not work correctly. We will have bookmarks in the 2.0 version so you will be able to recreate whatever may be lost in the upgrade. Everything else appears to have come across fine in our initial tests. Thank you!
    Dismiss Notice
  2. Sunday, June 23, 2019, 11pm EST. We were planning to import this forum into the new software tonight, however, it's not going to happen just yet. We hope to be using the new forum software by the end of the week.
    Dismiss Notice

Sparky's products at HiveWire

Discussion in 'Show Me The Honey' started by Sparky, Jan 12, 2016.

  1. Rae134

    Rae134 Renowned CV-BEE Contributing Artist

    Evilinnocence has just the thing for you. The base program is free, CrossDresser 4 Installer - An Evilinnocence Creation at HiveWire 3D, Then you just have to purchase the Dawn and Dusk Licence, CrossDresser License for Dawn - An Evilinnocence Creation at HiveWire 3D and CrossDresser License for Dusk - An Evilinnocence Creation at HiveWire 3D. (its for windows only tho, wont work on a mac). Then you just have to spend a little time to get your clothing converted over. I haven't used it but I've read it works great in most cases.
     
    Dakorillon (IMArts) likes this.
  2. Hornet3d

    Hornet3d Distinguished


    I used that a lot when I first started using Dawn but these days I am using it less and less as Dawn's wardrobe continues to grow. Great program and does a good job on most content.
     
    Dakorillon (IMArts) and Rae134 like this.
  3. carmen indorato

    carmen indorato Extraordinary

    Thanks but I was mostly talking about body fixes and adjustments morphs, character changes and textures as well as accessories. For instance because of some of the imagery I create I use the V4 Male to use some of the textures I have for V4 so I can also get a similar texture such as dirty or bruised or wet on a male.
    I found some nice morphs to convert M4 too for instance to a female when the textures warrant a reversal on that. I am sure to get Dawn and Dusk to work like that I would have to wait for more stuff to be released, beg for someone to create it or buy a lot more stuff. Thus my reason to not using them....just not practical or cost effective at this time.
     
  4. carmen indorato

    carmen indorato Extraordinary

    Yeah and being on a Mac as it has always been the case many of these cool applets to do these cool things just not available.
     
  5. Rae134

    Rae134 Renowned CV-BEE Contributing Artist

    ahhh its a pitty it doesn't work on Mac. Now as far as textures go, There's Texture Transformer V2 from Blacksmith3D at Rendo, that does a great job of converting textures from V4 to Dawn and M4 to Dusk, you just have to get the add-on for them (The full Blacksmith 3D Pro program has TT in it if you wanted to be able to be about to Paint, Sculpt or Create Hair as well but I think you still need the Dawn/Dusk add-ons). Morphs I can't help you with sorry.
     
    Dakorillon (IMArts) likes this.
  6. Sparky

    Sparky Monster Maker Contributing Artist

    This one will be on the Philosopher's Egg, but I thought I'd share anyway. ^.^ During my experiments with Werebeast and my Clone Army, I decided to try to put Werebeast onto M4. I think he turned out pretty well, though he is Poser 10+ only. He'll be something of a test case. If he does well in the market, I'll make more of these weightmapped characters for M4/V4, starting with a V4 version of Werebeast. If he tanks, I'll stick to putting modern characters on modern figures, 'cause he was an absurd amount of work. ;-)

    WerebeastM4_05_LRG.jpg
     
  7. Sunfire

    Sunfire One Busy Little Bee QAV-BEE Contributing Artist

    Doesn't he require a weightmapped M4 to use?
     
  8. Miss B

    Miss B Drawing Life 1 Pixel at a Time CV-BEE

    Hmmmm, I saw that on the render and didn't think anything of it, but that's a good question, unless Sparky's included the weightmapping in her Werebeast. Now you've got me curious too.
     
  9. Sparky

    Sparky Monster Maker Contributing Artist

    Yep, weighmapping included. With Poser you can inject weightmaps into a figure. Unfortunately, it's not something you can do with Studio, which is why he's poser-only. So, I basically had to re-rig M4 for this project, LOL!
     
    Dakorillon (IMArts) likes this.
  10. Sunfire

    Sunfire One Busy Little Bee QAV-BEE Contributing Artist

    Ahh. He's very nice looking. Hope you'll let us know when he's available.
     
  11. carmen indorato

    carmen indorato Extraordinary

    Oh REALLY NICE!
    Finally a WM version of M4. Make sure you mention that on the product page in clear to read text because i have read many in the community have wanted a WM version of M4 for a while but being an unpopular figure or gender it just never caught on as a money maker. If the WM version is now going t be out there other character for it might be easier to sell.
    I don't suppose we can see more images of different angles or in other poses or default poses too dear?
     
    Dakorillon (IMArts) likes this.
  12. Sparky

    Sparky Monster Maker Contributing Artist

    Here's a promo I did mostly to show the hand detail.
    WerebeastM4_01_LRG.jpg

    And here's a quick render of him in a fairly neutral pose under simple lighting (two white infinite lights).

    NeutralRender.jpg
     
  13. Sparky

    Sparky Monster Maker Contributing Artist

    Here are the poses I made for him.

    WerebeastM4_06_LRG.jpg
     
  14. mininessie

    mininessie Dances with Bees Contributing Artist

    amazing work!
     
  15. Miss B

    Miss B Drawing Life 1 Pixel at a Time CV-BEE

    I'll say! Well done Sparky!! :)
     
  16. Sunfire

    Sunfire One Busy Little Bee QAV-BEE Contributing Artist

    Veeery nice!
     
  17. Stezza

    Stezza Extraordinary

    I wonder if this beast will work in Carrara .... hmmm
     
  18. Chris

    Chris HW3D President Co-Founder

    Good luck with this product Sparky. It's very impressive for sure.
     
  19. carmen indorato

    carmen indorato Extraordinary

    Wow. Really like the features and your inclusion of hair is also great. I was going to get Mephistopheles(spelling!?) Werewolf for so long but now i can bypass it and just get this! What will we need for this to work: Creature Creator, M4++ and...??
    Is there going to be a variety of texture colors including a genital tex?
    Are there going to be body shape morphs fat skinny young old etc? Would be nice to be able to get a variety of characters of this beautiful beast!
     
  20. Sparky

    Sparky Monster Maker Contributing Artist

    Thanks, guys! :balloon03:

    I'm not familiar with the Mephistopheles Werewolf...is he on Rendo?

    He's just on base M4, he doesn't need anything except for the base figure. He will come with three colours, Brown, White and Black, gens textures will be included also.

    I didn't specifically make body shape morphs for him, but he is perfectly compatible with the Morphs++ body shapes. Here's a quick look at him mixed with Emaciated (left), Bodybuilder (center), and Heavy (right). Mix-n-Match is what it's all about. :alien:

    WerebeastMorphs++.png
     

Share This Page