• Welcome to the Community Forums at HiveWire 3D! Please note that the user name you choose for our forum will be displayed to the public. Our store was closed as January 4, 2021. You can find HiveWire 3D and Lisa's Botanicals products, as well as many of our Contributing Artists, at Renderosity. This thread lists where many are now selling their products. Renderosity is generously putting products which were purchased at HiveWire 3D and are now sold at their store into customer accounts by gifting them. This is not an overnight process so please be patient, if you have already emailed them about this. If you have NOT emailed them, please see the 2nd post in this thread for instructions on what you need to do

WIP MEC4D - Creations for Dawn 2 and Dusk 2 , work in progress

MEC4D

Zbrushing through the topology
Contributing Artist
My goodness! I thought we were just getting Northern European, West African, North African, East Asian, & Latino (did I miss him?). You've got Buddy, Dali, Grandpa Mario, too? Dusk 2 is going to be set!
Yes the first basic couple go to be finished as soon as possible so hopefully I am ready for the official release of D2, that's my goal. I have of course unlimited resource to make any stuff so not limitations when comes to characters. I want to make in the future also anime characters so the list will be long and I am happy about it.
 

MEC4D

Zbrushing through the topology
Contributing Artist
Wow! All this in one day?!?! You are fast! And good!

Dana
Thank you so much Dana , shaping characters take not long for me, maybe 2 hours per head shape , but then the technical side and adjustments take long time to make. The part I don't enjoy that much. I still need to adjust teeth ( positions and shapes) eyelashes , correction morphs etc..
 

MEC4D

Zbrushing through the topology
Contributing Artist
I sent my boys to the park and sneaked in for another Zbrush session :p ;)
Her name is Pari ( means "fairy" in Persian language )

I just blasted her unmasked ears with smooth option just moment ago and did not noticed it, need to reconstruct it back now.
 

Attachments

  • Screenshot 2021-03-13 151741.jpg
    Screenshot 2021-03-13 151741.jpg
    81.2 KB · Views: 181
  • Screenshot 2021-03-13 151624.jpg
    Screenshot 2021-03-13 151624.jpg
    64 KB · Views: 196
  • Screenshot 2021-03-13 151300.jpg
    Screenshot 2021-03-13 151300.jpg
    46.9 KB · Views: 184
  • Screenshot 2021-03-13 151025.jpg
    Screenshot 2021-03-13 151025.jpg
    34.8 KB · Views: 168
  • Screenshot 2021-03-13 150006.jpg
    Screenshot 2021-03-13 150006.jpg
    139.1 KB · Views: 188
  • Screenshot 2021-03-13 142034.jpg
    Screenshot 2021-03-13 142034.jpg
    163.7 KB · Views: 173
  • Screenshot 2021-03-13 150426.jpg
    Screenshot 2021-03-13 150426.jpg
    118.9 KB · Views: 185

MEC4D

Zbrushing through the topology
Contributing Artist
Yeah, that's a pretty and unique face shape for sure.
Thank you Chris, I managed to make one more for today :)
Ikoma .. made in Japan
 

Attachments

  • Screenshot 2021-03-13 185106.jpg
    Screenshot 2021-03-13 185106.jpg
    136.6 KB · Views: 175
  • Screenshot 2021-03-13 185617.jpg
    Screenshot 2021-03-13 185617.jpg
    129.7 KB · Views: 171
  • Screenshot 2021-03-13 185751.jpg
    Screenshot 2021-03-13 185751.jpg
    104.3 KB · Views: 175
  • Screenshot 2021-03-13 184945.jpg
    Screenshot 2021-03-13 184945.jpg
    90 KB · Views: 169
  • Screenshot 2021-03-13 184020.jpg
    Screenshot 2021-03-13 184020.jpg
    157.1 KB · Views: 169
  • Screenshot 2021-03-13 184858.jpg
    Screenshot 2021-03-13 184858.jpg
    68.6 KB · Views: 168
  • Screenshot 2021-03-13 190308.jpg
    Screenshot 2021-03-13 190308.jpg
    128.3 KB · Views: 171
  • Screenshot 2021-03-13 191100.jpg
    Screenshot 2021-03-13 191100.jpg
    123.1 KB · Views: 192

MEC4D

Zbrushing through the topology
Contributing Artist
Oh yes!! Love this. Love his eyes. Well done.

The Last Samurai.
Thank you Chris , the eyes took me a little with the "double" eyelid , thankfully enough edges in the base mesh to make one and worked smooth without subdivision. I am still amazed with the base mesh , so inspiring ..

The last Samurai for now ;):D
 

Miss B

Drawing Life 1 Pixel at a Time
CV-BEE
(that's Aussie for "Rae thinks he's hot" lol)
Not really, I remember folks using that expression here in the US, but it was an older generation when I was in my late teens and 20s, so not recently.

I happen to agree with you though. That type of beard and mustache I like. It's the beards that cover the full cheeks and chin, and hide most of the face, I don't care for.
 

Chris

HW3D President
Staff member
Co-Founder
That is the problem , Dawn and Dusk have the irises slightly too narrow, I will correct it once I start rigging the shapes and put them apart a little bit, for all of my shapes. I did not touched the eyeballs , they are in the original position .
Just a point worth mentioning. The eyeballs themselves are pointed directly and exactly forward. It is true that the spacing from inside of the eye to the outside corner of the eye opening are not the same. This can all be adjusted with Paul's rigging work if need be.

Not to worry.
 

MEC4D

Zbrushing through the topology
Contributing Artist
Just a point worth mentioning. The eyeballs themselves are pointed directly and exactly forward. It is true that the spacing from inside of the eye to the outside corner of the eye opening are not the same. This can all be adjusted with Paul's rigging work if need be.

Not to worry.
You know Chris also depends of camera focal and angle, but I saw a lot of Dawn's renders and people not bother to set the eyes right, since my shapes have different eye's forms I will need to adjust it once I am going to rig the shapes . It would be good for Paul to check it out to be sure.
 
Last edited:

MEC4D

Zbrushing through the topology
Contributing Artist
We were watching today "Raya and the last dragon " animation movie , and got inspired with Dawn 2.0
meet Alisa .. :p :D
 

Attachments

  • Screenshot 2021-03-14 160218.jpg
    Screenshot 2021-03-14 160218.jpg
    130.1 KB · Views: 127
  • Screenshot 2021-03-14 160139.jpg
    Screenshot 2021-03-14 160139.jpg
    102.3 KB · Views: 124
  • Screenshot 2021-03-14 155324.jpg
    Screenshot 2021-03-14 155324.jpg
    53.2 KB · Views: 127
  • Screenshot 2021-03-14 155828.jpg
    Screenshot 2021-03-14 155828.jpg
    57.5 KB · Views: 135
  • Screenshot 2021-03-14 154912.jpg
    Screenshot 2021-03-14 154912.jpg
    46.8 KB · Views: 131
  • Screenshot 2021-03-14 160017.jpg
    Screenshot 2021-03-14 160017.jpg
    415 KB · Views: 161

Rae134

Renowned
CV-BEE
Contributing Artist
Not really, I remember folks using that expression here in the US, but it was an older generation when I was in my late teens and 20s, so not recently.

I happen to agree with you though. That type of beard and mustache I like. It's the beards that cover the full cheeks and chin, and hide most of the face, I don't care for.
yes, its a pretty old expression but wasn't sure if it was universal so thought I better explain just in case lol

Just found from Wiki: "Hubba, hubba" is a North American informal exclamation used to express approval, excitement, or enthusiasm, especially with regard to a person's appearance.
 

MEC4D

Zbrushing through the topology
Contributing Artist
That's Dawn2 ???!!!???!!!

Oh how Dawn didn't get enough cartoon love, hopefully if people see this the new Dawn will!
Yes that is Dawn 2.0 , I like to switch from one to another , so my eyes are not used to the same . I will make a cartoon boy for her and maybe more with the time , but the cartoon family will be all for Dawn 2.0 , there is no need to separate it over to Dusk 2.0 as that would be double work and higher prices .
 

MEC4D

Zbrushing through the topology
Contributing Artist
OK, so you guys Down Under stole it from us . . . we didn't steal it from you. :rofl:
Some says the USA Army soldiers stole it from the Chinese soldiers in WW2 , while they where in Florida. That suppose to be greeting in Chinese but since they did not understand it, they made up own word based on what they heard , just found it on google original word was "How pu how."
 
Top