VolpeBox's Products at HiveWire 3D

Discussion in 'Show Me The Honey' started by VolpeBox, Feb 9, 2018.

  1. VolpeBox

    VolpeBox Inspired Contributing Artist

    Hey guys!
    I'm new in Poser/Daz world, but I did make some works, like "CKV-01 for Dawn" and "Fashion Vol.1 - Casual, Fantasy & Scifi" with Ken1171, that was who showed me Poser (I'm still learning from him) haha.

    Now, I' making a house for HiveWire3D Big Dog
    Here some screens:

    FireFly render​
    1.jpg

    And this is how I want to reach in SuperFly and IRay (ignore the water):
    (Test render in another software)
    img.jpg
    The colors will be customizable
    Hope you like!!!
     
    Last edited: Feb 9, 2018
  2. Hornet3d

    Hornet3d Dances with Bees

    You bet I like it. I have both of the products you mention.
     
    Ken1171 and VolpeBox like this.
  3. VolpeBox

    VolpeBox Inspired Contributing Artist

    Thank you!! =)
     
  4. Hornet3d

    Hornet3d Dances with Bees

    Believe me, the pleasure is all mine.
     
  5. Miss B

    Miss B Drawing Life 1 Pixel at a Time CV-BEE

    Very nicely done Volpe. I especially like the little dinner porch (or whatever you want to call it).

    Oh, and welcome to the HiveWire forums. ;)
     
    Dakorillon (IMArts) and VolpeBox like this.
  6. Alisa

    Alisa Peacekeeper & HW3D QAV Queen Bee Staff Member QAV-BEE

    *waves* Welcome to the forums!

    What a cool thing to have the food and water dishes built in!
     
    VolpeBox likes this.
  7. Ken1171

    Ken1171 Dances with Bees Contributing Artist

    Welcome to the HW forums, partner! Love that house! ^___^
     
    Dakorillon (IMArts) and VolpeBox like this.
  8. VolpeBox

    VolpeBox Inspired Contributing Artist

    Thanks! The food and water can be removed from the bowl too.

    Thank you Alisa! =)

    Hey Ken! Thanks haha
     
    Dakorillon (IMArts) likes this.
  9. Lyne

    Lyne Dances with Bees HW Honey Bear

    Welcome to the Hive! :)
    Very cool! Looks like our little Luna could crawl inside with the "doggie" too!! I'll buy! :)

    PS I use Poser 2014 ONLY....
     
    Last edited: Feb 9, 2018
  10. FairyFantastic

    FairyFantastic Energetic

    hi welcome to hive and wat a great doggy house im sure hive dog will love it to x
     
  11. Ken1171

    Ken1171 Dances with Bees Contributing Artist

    SMS has compromised P9 compatibilty, so we are making everything for P10 and P11. You should be covered. :)
     
    Dakorillon (IMArts) and Lyne like this.
  12. Sunfire

    Sunfire One Busy Little Bee QAV-BEE Contributing Artist

    I have noticed if it is made in P11, morphs and the like don't work in P9/PP2012, but if they're made in PP2014, they're usually okay. But then that means you then have to load it into P11 if you want to make superfly specific textures, a real pain in the....
     
  13. Hornet3d

    Hornet3d Dances with Bees

    Pardon my manners Volpe, I was so taken with the house I clean forgot to welcome you to the forum, so a belated welcome not only to the forums but also the Poser/Daz world, you have made quite an entrance. I hope you stick around and have fun.
     
    Dakorillon (IMArts) likes this.
  14. Rae134

    Rae134 Distinguished CV-BEE Contributing Artist

    Welcome and neat house!
     
  15. Dakorillon (IMArts)

    Dakorillon (IMArts) Extraordinary Contributing Artist

    Wonderful work! Welcome to the Hive!
     
  16. Ken1171

    Ken1171 Dances with Bees Contributing Artist

    That seems to be true. P11 was compatible with P9 at content creation until more or less SR-4, where something was changed that broke backwards compatibility. The problem with going back to P10 is that a good part of the rigging tools are broken. SMS has fixed most of them in P11, and will not touch older versions, so they will always remain broken. For once, the morphing tool is utterly incompatible with JCMs in P9 and P10, and deleting a selected morph will actually delete almost all morphs from all figures and clothing on the scene. And this is just the tip of the iceberg. Therefore I cannot use older versions for rigging. LadyLittleFox has written a long article explaining why she quit Poser and switched to DS because of those things.

    Like I said, SMS has fixed most of those things in P11, but JCM handling is still flaky at best. It works good enough so I can finish products, but it's just a workaround, not a fix. If you go back to P9 and P10, there is just no way to do it. It's Ok if you just create things that don't need rigging and conforming.
     
  17. Riccardo

    Riccardo Enthusiast

    Well, @VolpeBox , that's quite impressive for being new to Poser/Daz world!!!!
    Welcome here, anyway :)
     
  18. VolpeBox

    VolpeBox Inspired Contributing Artist

    Thank you! Poser 2014 is the Poser 10? I'm trying to make it compatible with poser 10 too.

    Thank you guys!

    Haha, no problem! Thank you!
     
    Dakorillon (IMArts) and Rae134 like this.
  19. VolpeBox

    VolpeBox Inspired Contributing Artist

    Some Poser material update:

    FF.jpg
    FireFly

    SF.jpg
    SuperFly​
     
    mininessie, pommerlis, Me195 and 5 others like this.
  20. Ken1171

    Ken1171 Dances with Bees Contributing Artist

    Looking great in both renderers! ^^

    Yes, Poser 10 and Poser Pro 2014 are editions of the same version.
     
    Last edited: Feb 11, 2018

Share This Page